Mounting Information:

Brock Dock plastic/vinyl post covers.

You will need to remove the Brock Post cap which is glued inside the top of your Brock Post. The easiest way to do this is to remove the Brock Post and ram a heavy object through the pipe so that it knocks out/off the end cap. There are two different ways to mount your light to the inside of the Brock Post.

1. WE HIGHLY RECOMEND YOU GLUE YOUR LIGHTS TO THE PVC BROCK POST COVER! We recommend you NOT use PVC glue as it sometimes does not properly bond the two plastics! USE A THICKER TYPE GLUE (EG LIQUID NAILS, GOOP, GARILLA GLUE, ETC...) With this permanent mounting option we recommend you remove the Solar Dock Lite's top (electronics portion) for winter months.

2. You can dill a set screw hole through your brock post to attach it with a screw.